3M Reston Self-Adhering Foam Products

How to Apply Reston Foam Dressing?

• Open the package and remove the foam pad
• Peel the paper liner from the pad, exposing the adhesive
• Position the pad over the body area (or device) to be covered with the adhesive side towards that area
• With the pad in a relaxed form, gently apply the pad to the desired area
• Gently smooth the pad from the center towards the edges to prevent tension

• Contraindications:
  
  • This product is not to be used as a dressing in post-surgical treatment procedures such as liposuction
• Warnings:
  
  • Reston self-adhering foam products have not been evaluated for use as a compression dressing material in surgical procedures such as liposuction
  • The product should not be applied to the skin under tension
  • Such uses can result in damage to the skin such as blistering or tearing which may lead to hypopigmentation and the risk of serious infection
  • Reston self-adhering foam products should not be placed in direct contact with an open wound
• Storage and Shelf Life:
  
  • For best results, store at normal room temperature, 59-86 degrees F (15-30 degrees C) and out of direct UV light.
  • For shelf life, refer to the expiration date which is printed on the package.

3M Reston Foam Dressing Specifications

Customer Reviews